Snap-away Support Enabled

CFS is able to deliver model supports in a different material that can be easily snapped away or even water-soluble. The resulting 3D model will not show any support marks Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printeer For regular filaments, you can also edit the info manually. CFS can switch filaments fluently and precisely for a multicolortask. It can also relay a running-out spool with a similar one installedd. Minimal interruption and waste. *Not compatible with flexible TPU, damp BVOH/PVA, or warped cardboard filament spools

Sensors are used to watch over each spool of filament. When a filament runs out or gets tangled, it will pause and notify you immediately. Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printeer For regular filaments, you can also edit the info manually.

No more filament jumping out of the slot during printing. Perfectly adapted to Creality Hyper Series cardboard spools.

379*314*276 mm

4.56kg

• Filament Diameter :1.75±0.05mmCompatible Filaments :"PLA/ABS/PETG/ASA/PET/PA-CF/PLA-CF; not compatible with damp filaments; not compatible with TPU95A or other flexible filaments
• Filament Slots :4
• Multicolor 3D Printing:Yes
• Auto Filament Relay:Yes
• RFID-tag Reader :Yes
• Filament Run-out Detection :Yes
• Filament Buffer :Yes
• Anti-moisture Storage:Yes with desiccants
• Filament Diameter :1.75±0.05mm
• Filament Spool Requirement:1kg spool or any spool with a diameter of 197-202mm; spool width: 42-68mm
• Rated Power:20W
• CFS Connections:≤4
• Rated Voltage :DC 24V
• Status Indicators :4 ( each slot having one)

• CFS
• Filament Buffer
• PTFE Tubes
• 485 Cables
• Power Cable
• Spare Filament Cutter